Active DIY Electronics Projects

(found 10 projects)

Ends Today

Amoby - Transforming air everywhere

Purification, sterilization, deodorization - ALL IN ONE
Technology / DIY Electronics
Current

104%

Backers: 83
Funding: $41,764 of $40,000 (104% funded)
Average daily pledges: $928
Campaign Dates: October 14th -> November 28th (2024)
Time left: 0 days, 1 hours, 56 minutes

Ends Sunday

LaserTonor Pi 1: Ultra Easy-to-Use 10W Laser Engraver 4 All

Multi-File Batch Engraving | Batch Contour Preview | Full-Angle Engraving | 100x2000mm Large Area | Easy & Fun APP | 1.93kg & Foldable
Technology / DIY Electronics
Current

596%

Backers: 77
Funding: $59,683 of $10,000 (596% funded)
Average daily pledges: $1,613
Campaign Dates: October 22nd -> November 30th (2024)
Time left: 2 days, 8 hours, 0 minutes

Ends a week from now

INKSI-01: Ultimate Handheld Printer for Large-Scale Printing

Print Big, Print Free, Print Smart with INKSI-01.
Technology / DIY Electronics
Current

1111%

Backers: 515
Funding: HK$863,877 of HK$77,700 (1111% funded)
Average daily pledges: HK$28,796
Campaign Dates: October 29th -> December 8th (2024)
Time left: 10 days, 9 hours, 50 minutes

Ends two weeks from now

Nova: A Super Bright Tiny RP2040 LED Matrix

A powerful RP2040 board with a vibrant 7x10 addressable LED matrix in a compact design
Technology / DIY Electronics
Current

205%

Backers: 131
Funding: €6,163 of €3,000 (205% funded)
Average daily pledges: €385
Campaign Dates: November 12th -> December 13th (2024)
Time left: 15 days, 9 hours, 16 minutes

Dual-function CANopen module : GPIO expander and I²C gateway

Control GPIOs, analog inputs and PWM over a CANopen network. Interface a CANopen network with a simple I²C bus
Technology / DIY Electronics
Current

13%

Backers: 3
Funding: €403 of €3,000 (13% funded)
Average daily pledges: €29
Campaign Dates: November 14th -> December 14th (2024)
Time left: 16 days, 9 hours, 18 minutes

Long Range MESH Decentralized IoT Network Based on LoRa®

Reach 65535 Nodes | 2.5 Km Range | Remote Configuration | Automatic Routing | Network Self-Healing | Up to 62.5 Kbps | Global Support
Technology / DIY Electronics
Current

318%

Backers: 59
Funding: ¥956,188 of ¥300,000 (318% funded)
Average daily pledges: ¥95,619
Campaign Dates: November 18th -> December 18th (2024)
Time left: 20 days, 3 hours, 19 minutes

Ends more than three weeks from now

Integrating AI with Hardware through Project-Based Learning

Artificial Intelligence Learning Kit: Hands-on Guide to Fine-Tuning Neural Network Models in Computer Vision
Technology / DIY Electronics
Current

347%

Backers: 89
Funding: $22,586 of $6,500 (347% funded)
Average daily pledges: $7,529
Campaign Dates: November 25th -> December 23rd (2024)
Time left: 25 days, 17 hours, 18 minutes

E-Tac-Toe: Redefining Classic Tic-Tac-Toe Gameplay

Electronic Tic-Tac-Toe Board! Combining the nostalgic charm of the classic game with the open-source Arduino technology.
Technology / DIY Electronics
Current

4%

Backers: 3
Funding: $195 of $4,400 (4% funded)
Average daily pledges: $11
Campaign Dates: November 10th -> December 25th (2024)
Time left: 27 days, 22 hours, 57 minutes

WAN-4-ALL Programmable LoRaWAN IoT Module and Maker Board

A compact embeddable ESP32–based LoRaWAN IoT module and development break-out for Arduino MKR, MikroBUS, Feather and Grove shields.
Technology / DIY Electronics
Current

2%

Backers: 3
Funding: £156 of £6,500 (2% funded)
Average daily pledges: £78
Campaign Dates: November 26th -> December 26th (2024)
Time left: 28 days, 7 hours, 15 minutes

50KM Bluetooth Range & 2Mbps Speed: MultiNav Pro+ BLE

Dual-Core Power, Real-Time Data, and Seamless Connectivity for Drones, Robotics, and More
Technology / DIY Electronics
Current

145%

Backers: 77
Funding: $7,253 of $5,000 (145% funded)
Average daily pledges: $269
Campaign Dates: November 1st -> December 31st (2024)
Time left: 33 days, 8 hours, 19 minutes
< Previous 1 Next >

(total 10 results)